|
Click pictures to see detail and/or add to shopping cart
|
|
|
|
Replacement Pool Table Rails (Uncovered)
Our replacement pool table rails for coin-operated Pool tables.
Our rails are of superior quality and can be ordered for any size Valley or Dynamo pool table.
Made from #1 Clear poplar
Premium pink K55 rubber
“Sawtooth” style T-nuts
Smooth cushion facings are glued and stapled
Made with pride in the USA
All sets are $199.95, plus $20 shipping and handling
Click the image above for more information.
Click the image for ordering information
Obsolete and hard to find rail sets (most available). PLEASE CALL TO DISCUSS SIZE NEEDED AND PRICE
Alltech, American Shuffleboard, Brunswick, Cooper, Fischer, Great American,
Global, Irving Kaye, Murrey, Shelti, Sunline, United, US Billiards, Venture
PLEASE CALL IF YOU WOULD LIKE ANY SET COVERED WITH MALI OR
CHAMPIONSHIP CLOTH (WITH OR WITHOUT BED CLOTH). Prices upon request.
|
|
|
|
|
|
Rubber Gully Boots (set of 6)
|
Plastic Gully Boots (set of 6)
|
|
GB/RB
|
$39.95 (+$15s/h)
|
GLY/BT/SET
|
$20.00 (+$10s/h)
|
|
|
|
|
|
3 inch pocket liners (set of six).
|
4 inch pocket liners (set of six).
|
|
PKT/L/3in
|
$16.50 (+$10 s/h)
|
PKT/L/4in
|
$18.50 (+$10 s/h)
|
|
|
|
|
|
Red, 4 inch pocket liner (set of six).
|
|
|
PKT/LINER/4
|
$19.50 (+$10 s/h)
|
|
|
|
|
|
|
|
Set of four leg levelers in Brushed Bronze finish. 6 1/4” wide at base. Includes mounting plate/nut and (1/2” threaded stud) Rubber base ring.
|
Set of four leg levelers in Textured Bronze finish. 6 1/4” wide at base. Includes mounting plate/nut and (1/2” threaded stud) Rubber base ring.
|
|
BR/LV
|
$69.95 (+$15s/h)
|
BR/TX/LV
|
$49.95 (+$15s/h)
|
|
|
|
|
|
Set of four leg levelers in Polished Chrome finish. 6 1/4” wide at base. Includes mounting plate/nut and (1/2” threaded stud) Rubber base ring.
|
Round Rail plates. 1/4” x 1 3/4” wide.
|
|
CH/LV
|
$44.95 (+$15s/h)
|
RRPL
|
$3.90 each
|
|
|
|
|
|
Set of four leg levelers (Brushed Aluminum) for Valley/Dynamo tables
|
T Nut for Leg Levelers
|
|
L/LV/SET
|
$49.95 (+$15s/h)
|
T/NUT/LL
|
$1.95 each
|
|
|
|
|
|
Valley Coin Chute End (6.5” with L Shaped End) for “C” style tables.
|
Valley Coin Chute Extension (6.5”) with straight end for “L” style tables.
|
|
CC/EXT
|
$14.95
|
CC/STR/EXT
|
$14.95
|
|
|
|
|
|
Valley Tournament Magnetic Cue Ball
|
Valley Cat’s eye Magnetic Cue Ball
|
|
TN/CB
|
$39.95
|
C/EYE
|
$24.95
|
|
|
|
|
|
Vertical Coin-slot mechanism for use on most coin operated tables. Will take up to $1.00 (set for .50 cents)
|
Valley Lock with Key (both #54 and C512A available)
Please call to order.
|
|
VCS/1
|
$59.95
|
VALLEY/LOCK/KEY
|
$12.95
|
|
|
|
|
|
Valley Corner casting
|
Chrome twist pocket nails with smooth head to hold
pocket liners in place. Set of 12.
|
|
VCC/1
|
$129.95 (+$15s/h)
|
CT/PN
|
$10.00 (+$6s/h)
|
|
|
|
|
|
Six rail Liner set for Valley/Dynamo tables. 36” kit (7 foot tables). Liners have cushion, covered in 18 ounce Valley Teflon Cloth. 18 ounce Tournament Green and comes with BED CLOTH.
Please note: This Rail system is for Valley/Dynamo tables
made after 2002.
|
Trim sets made from extruded anodized aluminum. Easy to install.
Cut and punched to fit any size table. Each set comes with four pieces and screws. (Made for Valley tables, Dynamo may need some alteration).
|
|
VAL/RAIL/KIT
|
$295.00 (+$30s/h)
|
Click image for pricing info
|
|
|
|
|
|
Unbreakable ball dump roller.
Self lubricating made to exacting tolerances.
|
Pivot Block solves the problem of slop in the pivot arm.
Two piece kit with screws and installation instructions.
|
|
BDR/1
|
$19.95 (+$6s/h)
|
PVT/BLOK
|
$22.95 (+$10s/h)
|
|
|
|
|
|
Quarter strip, 11.75” x 1.5”
Supplied with peel off sticky back to mount on table top apron.
|
Corner casting bolts with matching washers.
Sold in set of 8 bolts and 8 washers.
|
|
QS/COP
|
$4.95 (+$6s/h)
|
CST/BLT/SET
|
$12.95 (+$10s/h)
|
|
|
|
|
|
4.5” Rail bolts sold in set of 18. When replacing rails, it is smart to replace the rail bolts also.
|
Cushion facings (set of 12). Die cut, premium
cushion facings for coin-op rail sets.
|
|
RB/SET
|
$19.95 (+$10s/h)
|
FC/C-OP
|
$10.50 (+$10s/h)
|
|
|
|
|
|
Pocket buttons attach pocket liners to corner castings.
Standard (fits 1/4” hole). Set of 8.
|
Pocket buttons attach pocket liners to corner castings.
Small (fits 3/16” hole). Set of 8.
|
|
STAND/PB/SET
|
$10.50 (+$10s/h)
|
SMALL/PB/SET
|
$10.50 (+$10s/h)
|
|
|
|
|
|
Pocket screws used to hold pocket liners on tables with threaded corner castings (allen head, 10-32/1/2”). Set of 8.
|
Hardened and ground shoulder bolt holds ball dump tray in place. Sold in sets of two with lockwashers.
|
|
PSCR/SET
|
$6.50 (+$6s/h)
|
SB/SET
|
$9.95 (+$6s/h)
|
|
|
|
|
|
Coin return spring
|
Leg bolts for attaching fiberglass legs to pool tables.
Each leg requires 4 bolts (sold in sets of 16).
|
|
CR/SP
|
$5.95 ($+6s/h)
|
LB/16
|
$19.95 (+$8s/h)
|
|
|
|
|
|
TNuts, sawtooth style, 1/4” size (industry standard).
Fits most pool table brand rails. Sold in sets of 18.
|
Solid steel leg leveler TNut. These are mounted into the under-side of fiberglass pool table legs and provide a thread for leg levelers. 1/2-13 thread, set of four.
|
|
ST/18/SET
|
$21.95 (+$10s/h)
|
LL/SET/4
|
$11.95 (+$6s/h)
|
|
|
|
|
|
Trim nails for attaching trim around ball view opening, triangle opening, coin recess and bottom trim. Bag of 100.
|
Ball dump spring, highest quality, made in USA. Double end loops last and last.
|
|
TRIM/100
|
$12.95 (+$8s/h)
|
BD/SPR
|
$4.95 (+$6s/h)
|
|
|
|
|
|
Black plastic 6 inch wide leg levelers with plastic nut.
Set of four.
|
|
|
BLK/LL
|
$34.95 (+$15 s/h)
|
|
|
|
|
|
|
Next
|
)
.)
.)
.)
)
.)
.)
)